9500LB Boss Winch
  • BS 1/2 H2600 sintered bronze bushings
  • HRC 45±2 Carburizing S45C hardened carbon steel gears
  • Stamped planetary gear carriers
  • Cu-Ag contactors (Silvered-alloyed copper)
  • Kevlar brake pads

Strength tested, inspected, serial number tracked and manual includedPart No: EB9500S25
ERRP*: $1499.00

9500LB line drawing

lifetime warranty

reinforced cable

GEARBOX

Winch gearbox

control box

Control box

remote plug socket

Three Stage Planetary with high quality components. IP65 waterproof contactor (solenoid) system. IP55 Rated high quality plug with protective cap.

Winch Motor

electrical cables

Winch gearbox

reinforced eyelet

Control box

hand control

All BOSS series winches have been equipped with Tinned Coated Copper Power Cables with PVC insulation and the additional protection of a fibreglass outer sheath. Thimble in cable eyelet for reinforcement maximum strength.

Industrial grade hand control with forward and reverse. 5 meter lead

What's in the Box

  • Winch with laser engraved Serial Number
  • Control Box
  • Hand Control with storage bag
  • Tinned Copper Power Cable kit with Fibreglass Sheath Protection
  • 10mm x 28m, Genuine Dyneema® SK75
  • Alloy Fairlead with 25mm offset
  • 10-8 Clevis Hook
  • Hand Saver Hook Strap
  • Detailed Instruction Manual
  • Warranty registration Card
  • Winch and Fairlead Mounting Hardware (Bolts, Washer and Nuts)
  • Side mounting Kit for control box
  • Extra long control box mounting bolts
  • Spare Gearbox gasket

Boss Accessories

Tie Bar Extensions

Tie Bar Extensions

For extending tie bar height an extra 25mm (1"). Ideal for competition use.

Part No: FXETN
ERRP*: $22.95

12V Control Box

12V CONTROL BOX

To suit Boss series winch. Compatible with most 12 volt winches equipped with a series wound motor. Features waterproofed hand control power socket. (Hand control and power cables not included.)

Part No: CB02
ERRP*: $269.00

12V 500 Amp Solenoid

12V 500 AMP SOLENOID

Solenoid only, IP65 waterproof solenoid with Cu-Ag alloy contacts(Silver-alloyed cooper).

To suit Boss series winch. Also compatible with most 12 volt winches equipped with a series wound motor.

Part No: DCX500
ERRP*: $169.00

Hand Control

HAND CONTROL

To suit Boss Series winch.

Part No: RC03
ERRP*: $109.00

 
General Information
Specifications 9500lb (4309kg) - Boss Series
Voltage 12 Volt
Gear Ratio 166:1
Gear Tran 3 Stage Planetary
Clutch Sliding Ring Gear
Motor Type Series Wound
Motor 4.6 Hp, 3.43 Kw
Control Hand Control, 5m lead
Braking Automatic Direct Drive Load Holding
Drum Hardened Seamless Steel 63mm x 228mm(2.45" x 9")
Cable 10mm x 28m, Genuine Dyneema® SK75
Clevis Hook 3/8"
Overall Dimensions 554mm x 170mm x 190mm (27.82" x 6.7" x 7.5")
Net Weight 31kg
Mounting Bolt Pattern 254mm x 114.3mm (10" x 4.5")
Battery Power Cables 2 x 1900mm x 25mm², Tinned Copper with Sheath Protection
Motor Power Cables 3 x 450mm x 25mm², Tinned Copper with Sheath Protection
Recommended Battery Minimum 650CCA
Performance of 1st Layer
Line Pull Line Speed Motor Amp Draw Current
0 lbs 0 kgs 35.4 Fpm 10.7 Mpm 50 12 Volt
2000 lbs 910 kgs 16.7 Fpm 5.1 Mpm 80 12 Volt
4000 lbs 1816 kgs 12.7 Fpm 3.8 Mpm 150 12 Volt
6000 lbs 2724 kgs 10.6 Fpm 3.2 Mpm 220 12 Volt
8000 lbs 3632 kgs 9.0 Fpm 2.7 Mpm 280 12 Volt
9500 lbs 4309 kgs 7.8 Fpm 2.3 Mpm 330 12 Volt

Line Pull & Cable Capacity by Layer
Cable Layer Rated Line Pull Cable Capacity
1 9500 lbs 4309 kgs 19.36 Feet 5.90 Metres
2 8190 lbs 3715 kgs 42.00 Feet 12.80 Metres
3 7500 lbs 3402 kgs 69.88 Feet 21.30 Metres
4 7010 lbs 3180 kgs 98.50 Feet 30.00 Metres