Snatch Strap Kit 11,000kg
What size Snatch Strap do I need?
You need to ensure that you purchase a snatch strap that is rated at two and a half to three times your Gross Vehicle Mass (fully loaded vehicle's weight). For example, the typical weight of a Dual Cab Toyota Hilux is 2,780kg. That would mean that yo
The specifications of this Mean Mother Snatch Strap are 11,000kg (12 Tonne) 75mm width x 9m Long
All Mean Mother snatch straps are tested to meet the highest quality and strength standards. They are manufactured from 100% treated nylon webbing with reinforced eyelets to prolong operational life.
Similar to a rubber band, a snatch strap being stretched between two vehicles generates a kinetic energy pulling force as the strap returns to its original length. The combination of the recovery vehicle pull and the pulling force from the strap creates a "snatching" effect that can heave a stranded vehicle free from being bogged or unable to move under its own power.
✳️ High tenacity nylon webbing
✳️ Reinforced eyelets
✳️ Thermo fixed and treated for longer wear
✳️ High elongation of 20%
How To Use a Snatch Strap
When using a snatch strap carefully follow the safety guidelines set out in the instruction sheet included with each kit.
When used in accordance with the Guidelines for safe use of vehicle Recovery Straps
Guidelines for safe use of Vehicle Recovery Straps
4WD Industry Council AAAA Guidelines
Mean Mother Snatch Strap User Manual 2021 - MM Snatch Strap Manual 2021
Recovery Damper
The most important safety accessories you can own. Designed to eliminate the whipping action of a strap or winch cable in the event of a failure, they reduce the possibility of personal injury and vehicle damage. The damper comes in a high visibility safety orange with reflective tape for both day & night use. To install, simply fold the damper over the strap or cable and position midway between the vehicle and recovery strap.
- Quality orange vinyl winch cable damper with reflective silver stripes
- Hook and loop tape closure
- Storage pocket on the inside
- Dimensions: 90cm x 50cm
- Total weight: 1.1kg
Leather Recovery Gloves
These Mean Mother leather recovery gloves have been made using premium grain leather and feature stitch free palms, a winged thumb and elastic cuff. Leather gloves are extremely important when handling recovery accessories, equipment or wire cable as they offer protection to your hands.
- Made from quality leather
- Stitch free palm area
- Winged thumb with elastic cuff
- Sold as pair
- Size: Large
Injuries to hands often occur during a recovery from wire cables which have splintered or burred, pinching skin between mechanisms of a high lift jack, cutting fingers while handling and securing shackles or recovery points. There are many ways you could cause injury to yourself while attempting a recovery however by wearing leather gloves you will reduce the likelihood of injury to your hands.
Also Available
Click & Collect - Darra, Brisbane
Pick-up from 64 Argyle Parade, Darra QLD, Australia
Monday to Friday 8am to 4pm.
