How to Use a Tyre Deflator | Best Tyre Deflator Pat Callinan Approved — MEAN MOTHER 4X4
Skip to content
afterpay available
afterpay available FIND YOUR STORE  
How to Use a Tyre Deflator

How to Use a Tyre Deflator

When you're hitting the off-road trails or sandy beaches, adjusting your tyre pressure is crucial for better traction and a smoother ride. Lowering your tyre pressure helps your vehicle "float" over sand, rocks, or mud, reducing the risk of getting stuck or damaging your tyres. Here’s a step-by-step guide on how to use a 4WD tyre deflator effectively, featuring the Mean Mother Tyre Deflator.

Why Lowering Tyre Pressure is Essential Off-Road

Off-road terrains demand more from your vehicle, especially your tyres. Lowering tyre pressure provides:

  • Increased traction for navigating sandy or rocky areas
  • Softer ride over rough surfaces
  • Reduced chance of tyre punctures by allowing the tyre to flex over sharp obstacles.

For sandy conditions, such as beach driving, it’s generally recommended to start with a pressure around 18 PSI, although this can vary based on vehicle type and weight.

Step 1: Setting Up Your 4x4 Tyre Deflators

The Mean Mother Tyre Deflator Kit comes in a convenient four-pack, so you can adjust all four tyres simultaneously. Here's how to set them up:

  1. Adjust the Pressure Setting:

    • Each deflator allows you to pre-set your desired PSI, which is shown in the gauge.
    • Twist the dial to the desired PSI level (e.g., 18 PSI for beach driving) and lock it in place by tightening the locking ring.

  2. Attach the 4WD Tyre Deflator to the Tyre:

    • Once set, simply screw the deflator onto the tyre valve stem.
    • You’ll hear air start to release immediately.

Step 2: Deflate All Tyres Quickly

The Mean Mother Tyre Deflators are a “set and forget” tool. Once attached, they automatically deflate your tyres to the set PSI level, allowing you to move on to other tyres while the deflation happens.

  1. Attach All Four Deflators:

    • Connect each 4x4 Tyre Deflator to a tyre, so all four are deflating simultaneously.
    • You’ll have all tyres deflated to your chosen PSI in approximately 2-3 minutes.

  2. Monitor the Pressure:

    • Double-check the PSI with a pressure gauge if necessary to ensure all tyres are at the desired pressure.

Step 3: Removing the Deflators

Once the tyres have reached the set PSI level, remove the deflators and replace the valve caps. The 4WD Tyre Deflators come with four spare caps and a threaded end, making it easy to store caps securely and avoid losing them.

Step 4: Inflate your tyres back to your Recommended Pressure

Remember to reinflate your tyres to the manufacturer's recommended pressure after leaving the area. Use a reliable air compressor like the Mean Mother Adventurer 4, which comes with a 5-year warranty for peace of mind. 

Pat Callinan of Pat Callinan's 4x4 Adventures rates the Mean Mother Tyre Deflator as the Best Tyre Deflator on the Market

Tyre Deflator Maintenance and Care Tips

Off-road environments are often dusty and sandy, which can clog deflators. Here’s how to keep them in good condition:

  • Cleaning:
    • If they get sandy or dirty, simply unscrew each deflator and give it a quick rinse with water.
    • You can also blow on the internals to remove any lingering particles.

  • Storage:
    • Store the deflators in a clean, dry place to avoid rust or clogging.

Final Thoughts

Using the Mean Mother Tyre Deflators allows you to prepare for off-road adventures efficiently. With their simple, set-and-forget functionality, you’ll be ready to conquer sandy beaches, rocky trails, and muddy terrains with ease. Make sure to clean them periodically for optimal performance, and you’ll be all set for a smooth, controlled off-road experience.

Next article How to use a High Lift Jack

Leave a comment

Comments must be approved before appearing

* Required fields

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare